Flame Gard® Type VI Aluminum Baffle Grease Filters

Be the first to review this product

Availability: In stock

Product Name Price Qty
10" H x 16" W - Aluminum Type VI
$18.82
  • Buy 6 for $17.92 each and save 5%
10" H x 20" W - Aluminum Type VI
$19.47
  • Buy 6 for $18.54 each and save 5%
12" H x 16" W - Aluminum Type VI
$19.47
  • Buy 6 for $18.54 each and save 5%
12" H x 20" W - Aluminum Type VI
$19.47
  • Buy 6 for $18.54 each and save 5%
16" H x 16" W - Aluminum Type VI
$22.06
  • Buy 6 for $21.01 each and save 5%
16" H x 20" W - Aluminum Type VI
$26.60
  • Buy 6 for $25.34 each and save 5%
16" H x 25" W - Aluminum Type VI
$27.25
  • Buy 6 for $25.96 each and save 5%
20" H x 16" W - Aluminum Type VI
$26.60
  • Buy 6 for $25.34 each and save 5%
20" H x 20" W - Aluminum Type VI
$31.15
  • Buy 6 for $29.66 each and save 5%
20" H x 25" W - Aluminum Type VI
$36.99
  • Buy 6 for $35.23 each and save 5%
25" H x 20" W - Aluminum Type VI
$36.99
  • Buy 6 for $35.23 each and save 5%

Quick Overview

  • Aluminum, Flame Gard® Type VI Baffle Type Replacement Filter
  • The Manufacturer has replaced the old Grease Defender (FA30) Baffle filters with these new FA51 filters
  • Sturdy design with pop-riveted baffles
  • Sizes listed above are Height x Width (Height mm x Width mm)
  • Lightweight for ease of use
  • Safe, Dependable, Positive Flame Barrier Protection
  • Seamless, smooth surfaces permit constant grease run-off into hood collection troughs
  • All filters are supplied with Handles for easy install and removal
  • Grease Filters should be measured and installed with the Baffles running up and down (Vertical)
  • U.L. Tested & Classified
  • NSF Certified

Note: First two numbers of size indicate vertical height. Second two numbers represent horizontal width, both are nominal dimensions. Actual size of filters are 7/16" (11mm) less than nominal. Nominal thickness is 2" (50mm). Actual thickness is 1-3/4" (44mm).

 

Details

Grease Filters classified by Underwriters Laboratories, Inc. As to Flammability after exposure to grease laden air only (54-H6). File #R10173 (N) Accepted by the city of New York - Department of Buildings MEA#137-82-E, Vol. 2

Flame Gard is a registered Trademark of Component Hardware, Registered in the U.S.

You may also be interested in the following product(s)

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

Write Your Own Review

Only registered users can write reviews. Please, log in or register

Additional Information

Mfg: Flame Gard®
Model No. FA51-xxxx
eRestaurantParts No. 42140-42160
Unit Each