Flame Gard® Type VI Galvanized Steel Heavy-Duty Baffle Grease Filters

Be the first to review this product

Availability: In stock

Product Name Price Qty
10" H x 16" W - Galvanized Type VI
$18.17
  • Buy 6 for $17.30 each and save 5%
10" H x 20" W - Galvanized Type VI
$18.17
  • Buy 6 for $17.30 each and save 5%
12" H x 16" W - Galvanized Type VI
$18.17
  • Buy 6 for $17.30 each and save 5%
12" H x 20" W - Galvanized Type VI
$19.47
  • Buy 6 for $18.54 each and save 5%
16" H x 16" W - Galvanized Type VI
$21.41
  • Buy 6 for $20.39 each and save 5%
16" H x 20" W - Galvanized Type VI
$20.76
  • Buy 6 for $19.78 each and save 5%
16" H x 25" W - Galvanized Type VI
$24.66
  • Buy 6 for $23.48 each and save 5%
20" H x 16" W - Galvanized Type VI
$22.06
  • Buy 6 for $21.01 each and save 5%
20" H x 20" W - Galvanized Type VI
$25.96
  • Buy 6 for $24.72 each and save 5%
20" H x 25" W - Galvanized Type VI
$31.15
  • Buy 6 for $29.66 each and save 5%
25" H x 16" W - Galvanized Type VI
$27.90
  • Buy 6 for $26.57 each and save 5%
25" H x 20" W - Galvanized Type VI
$31.15
  • Buy 6 for $29.66 each and save 5%

Quick Overview

  • Flame Gard® Type VI Galvanized Baffle Grease Filter
  • Galvanized Steel for strong rugged performance, superb corrosion resistance and absolute low cost
  • Will not flex or twist like other filters
  • Safe, Dependable, Positive Flame Barrier Protection
  • Seamless, smooth surfaces permit constant grease run-off into hood collection troughs
  • Baffles are Pop-Riveted into place for a sturdy construction
  • Sizes above are listed as Height x Width
  • Grease Filters should be measured and installed with the Baffles running up and down (Vertical)
  • U.L. Tested & Classified
  • NSF Certified

Note: First numbers of size indicate vertical height. Second numbers represent horizontal width, both are nominal dimensions. Actual size of filters are 7/16" (11mm) less than nominal. Nominal thickness is 2" (50mm). Actual thickness is 1-3/4" (44mm).

 

Details

Grease Filters classified by Underwriters Laboratories, Inc. As to Flammability after exposure to grease laden air only (54-H6). File #R10173 (N) Accepted by the city of New York - Department of Buildings MEA#137-82-E, Vol. 2

Flame Gard is a registered Trademark of Component Hardware, Registered in the U.S.

You may also be interested in the following product(s)

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

Write Your Own Review

Only registered users can write reviews. Please, log in or register

Additional Information

Mfg: Flame Gard®
Model No. FG51-xxxx
eRestaurantParts No. 42212-42234
Unit Each