Flame Gard® Type VI Stainless Steel Baffle Grease Filters with Bright Finish

Be the first to review this product

Availability: In stock

Product Name Price Qty
10" H x 16" W - Stainless Steel
$36.99
  • Buy 6 for $35.23 each and save 5%
10" H x 20" W - Stainless Steel
$37.64
  • Buy 6 for $35.84 each and save 5%
12" H x 16" W - Stainless Steel
$38.29
  • Buy 6 for $36.46 each and save 5%
12" H x 20" W - Stainless Steel
$44.77
  • Buy 6 for $42.64 each and save 5%
16" H x 16" W - Stainless Steel
$40.23
  • Buy 6 for $38.32 each and save 5%
16" H x 20" W - Stainless Steel
$44.77
  • Buy 6 for $42.64 each and save 5%
16" H x 25" W - Stainless Steel
$49.97
  • Buy 6 for $47.59 each and save 5%
20" H x 16" W - Stainless Steel
$44.77
  • Buy 6 for $42.64 each and save 5%
20" H x 20" W - Stainless Steel
$50.61
  • Buy 6 for $48.20 each and save 5%
20" H x 25" W - Stainless Steel
$61.00
  • Buy 6 for $58.09 each and save 5%
25" H x 16" W - Stainless Steel
$49.97
  • Buy 6 for $47.59 each and save 5%
25" H x 20" W - Stainless Steel
$61.00
  • Buy 6 for $58.09 each and save 5%

Quick Overview

  • Flame Gard® Type VI Baffle Type Grease Filter - Replaces the old Grease Defender FS50 Stainless Steel Filters
  • Stainless Steel Filter with Stainless Steel Bright Finish
  • For tough commercial application and maximum permanent protection against rust and corrosion
  • Baffles Pop-Riveted into place for sturdier design
  • Easily cleaned by soaking, spraying or in conventional dishwashers
  • Grease Filters should be measured and installed with the Baffles running up and down (Vertical)
  • Sizes above are listed as Height x Width
  • U.L. Classified & Tested
  • NSF Certified


Note: First number of size indicate vertical height. Second number represent horizontal width, both are nominal dimensions. Actual size of filters are 1/2" less than nominal. Nominal thickness is 2" (50mm). Actual thickness is 1-3/4" (44mm).
 

Details

Grease Filters classified by Underwriters Laboratories, Inc. as to Flammability after exposure to grease laden air only (54-H6). File #R10173 (N) Accepted by the city of New York - Department of Buildings MEA#137-82-E, Vol. 2

Flame Gard is a registered Trademark of Component Hardware, Registered in the U.S.

You may also be interested in the following product(s)

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

Write Your Own Review

Only registered users can write reviews. Please, log in or register

Additional Information

Mfg: Flame Gard®
Model No. FR51-xxxx
eRestaurantParts No. 99254
Unit Each