Hardware Components

Items 1 to 25 of 327 total

Set Descending Direction
per page

Grid  List 

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
Stainless Steel Drawer Assembly - 20" Front

Stainless Steel Drawer Assembly - 20" Front

Starting at: $330.30

Mfg : CHG

Model No. : S90-0020

Units : Each

  • 20" (508mm) Front Stainless Steel Drawer Assembly
  • NSF listing applies to drawer assemblies utilizing stainless steel pans
  • Type 304 stainless steel, heavy duty, welded construction throughout
  • Rugged 18 GA. outer drawer housing with 16 GA. internal frame assembly
  • Includes 16 GA. welded stainless steel insulated front... minimizing utensil noise and providing quiet operation
  • Unique uni-body construction allows units to be stacked
  • convenient, precise mounting holes offer quick, easy installation
  • 200LB. Capacity
  • Self-closing drawer feature
  • Entire drawer assembly deburred and ready to install
  • Complete with heavy gauge removable stainless steel or plastic pan
  • Full extension - 90 degree pull allows convenient access and is easy to keep clean
  • Available with or without cylinder lock assembly
  • Specification grade, meets most architectural requirements
Learn More

Optional Posi-Grip Locking Ring A10-0010-C

Optional Posi-Grip Locking Ring

$0.55

Mfg : CHG

Model No. : A10-0010-C

eRestaurantParts No.: 40314

Units : Each

Learn More

Set Screw Hole Plugs

Set Screw Hole Plugs

$0.36

Mfg : CHG

Model No. : A10-0020

eRestaurantParts No.: 40316

Units : Each

  • To comply with NSF requirements
  • All set screw socket openings must be plugged after final assembly & tightening to be NSF Approved
Learn More

Stainless Steel Adjustable Hex Foot Insert - 1" (25mm) O.D. Tubing 16 GA. (1.5mm) & 18 GA. (1.2mm) A10-0221-C

Stainless Steel Adjustable Hex Foot Insert for Round 1" (25mm) O.D. Tubing 16 GA. (1.5mm) & 18 GA. (1.2mm)

$4.36

Mfg : CHG

Model No. : A10-0221-C

eRestaurantParts No.: 40318

Units : Each

  • Stainless Steel Clad Foot Insert with adjustable Hex toe
  • For Round 1" (25mm) O.D. Tubing or Pipe 16GA. & 18GA.
  • Stainless Steel Clad
  • Load Rating: 1100 lb/ft (500)kg/ft.
  • Height (when installed): 11/16" (17.5mm)
  • Adjustable hex toe permits an additional 13/16" (21mm) height adjustment
  • NSF Approved
Learn More

Nickel Plated Hex Foot Insert - 1-1/4" (32mm) O.D. Tubing 16 GA. (1.5mm) - Adjustable A10-0421-C

Nickel Plated Hex Toe Adjustable Foot Insert for Round 1-1/4" (32mm) O.D. Tubing 16 GA. (1.5mm)

$6.72

Mfg : CHG

Model No. : A10-0421-C

eRestaurantParts No.: 40320

Units : Each

  • Stainless Steel Clad Foot Insert with adjustable Hex Toe.
  • Stainless Steel Clad
  • Loading Rating: 1100lb/ft (500kg/ft.)
  • Recommended for Round Tubing and Pipe
  • Height (when installed): 3/4" (19mm)
  • Adjustable hex toe permits an additional 1-1/8" (28mm) height adjustment
  • NSF Approved
Learn More

Zamak Finished Hex Adjustable Foot Insert for 1-1/4" I.P.S. Pipe or 1-1/2" (38mm) O.D. Tubing A10-0611-C

Zamak Finished Hex Adjustable Foot Insert for Round 1-1/4" I.P.S. Pipe or 1-1/2" (38mm) O.D. Tubing

$5.99

Mfg : CHG

Model No. : A10-0611-C

eRestaurantParts No.: 40322

Units : Each

  • Natural Zamak Finished Hex Adjustable Foot Insert for Round 1-1/4" I.P.S. Pipe or 1-1/2" (38mm) O.D. Tubing 16 GA. (1.5mm)
  • Natural Zamak Finish
  • Load Rating of 2000 lb/ft (900)kg/ft.
  • Height (when installed): 1-1/4" (32mm)
  • Adjustable Hex toe permits 1-1/8" (28mm) height adjustment
  • NSF Approved
Learn More

Thermoplastic Black Hex Adjustable Foot Insert for 1-1/4" I.P.S. Pipe or 1-1/2" (38mm) O.D. Tubing A10-0631-C

Thermoplastic Black Hex Adjustable Foot Insert for Round 1-1/4" I.P.S. Pipe or 1-1/2" (38mm) O.D. Tubing

$1.44

Mfg : CHG

Model No. : A10-0631-C

eRestaurantParts No.: 40324

Units : Each

  • Thermoplastic Black Hex Foot Insert for Round 1-1/4" I.P.S. Pipe or 1-1/2" (38mm) O.D. Tubing 16 GA. (1.5mm)
  • Black Thermoplastic
  • Load Rating: 200 lb/ft (90)kg/ft.
  • Height (when installed): 1-3/8" (35mm)
  • Adjustable hex toe permits 1-1/16" (27mm) height adjustment
  • This item is a non-stock item. Gray Hex Foot Insert is a stocked item (A10-0641-C)
  • NSF Approved
Learn More

Thermoplastic Gray Hex Adjustable Foot Insert for 1-1/4" I.P.S. Pipe or 1-1/2" (38mm) O.D. Tubing A10-0641-C

Thermoplastic Gray Hex Adjustable Foot Insert for Round 1-1/4" I.P.S. Pipe or 1-1/2" (38mm) O.D. Tubing

$1.67

Mfg : CHG

Model No. : A10-0641-C

eRestaurantParts No.: 40326

Units : Each

  • Thermoplastic Gray Hex Foot Insert for Round 1-1/4" I.P.S. Pipe or 1-1/2" (38mm) O.D. Tubing 16 GA. (1.5mm)
  • Thermoplastic Gray
  • Load Rating of 200 lb/ft (90)kg/ft.
  • Height (when installed): 1-3/8" (35mm)
  • Adjustable Hex toe permits 1-1/16" (27mm) height adjustment
  • NSF Approved
Learn More

Stainless Steel Hex Adjustable Foot Insert 1-1/2" (38mm) I.P.S. or 1-1/2" (38mm) O.D. A10-0651-C

Stainless Steel Hex Adjustable Foot Insert for Round 1-1/4" I.P.S. or 1-1/2" (38mm) O.D. Tubing 16 GA. (1.5mm)

$6.92

Mfg : CHG

Model No. : A10-0651-C

eRestaurantParts No.: 40328

Units : Each

  • Stainless Steel Adjustable Hex Foot Insert for Round 1-1/4" I.P.S. Pipe or 1-1/2" (38mm) O.D. Tubing 16 GA. (1.5mm)
  • Adjustable hex toe allows for an additional 1-1/4" (32mm) height adjustment
  • Stainless Steel Clad
  • Load Rating of 2000 lb/ft (900)kg/ft.
  • Height (when installed): 1-1/2" (38mm)
  • NSF Approved
Learn More

Stainless Steel Flanged Adjustable Foot Insert 1-1/4" I.P.S. Pipe or 1-1/2" (38mm) O.D. Round Tubing 16 GA. (1.5mm) - With Mounting Holes

Stainless Steel Flanged Adjustable Foot Insert for Round 1-1/4" I.P.S. Pipe or 1-1/2" (38mm) O.D. Tubing 16 GA. (1.5mm) - With Mounting Holes

$13.00

Mfg : CHG

Model No. : A10-0654-C

eRestaurantParts No.: 40330

Units : Each

  • Stainless Steel Flanged Adjustable Foot Insert for 1-1/4" I.P.S. Pipe or 1-1/2" (38mm) O.D. Round Tubing 16 GA. (1.5mm) - With Mounting Holes
  • Flange Specs: 3-1/2" (89mm) Diameter Stainless Steel - With (2) 11/32" (9mm) DIA. Mounting Holes, spaced 2-1/2" (63mm) O.C.
  • Load Rating: 2000lbs (900Kg)
  • Height (when installed): 1-1/2" (38mm)
  • Adjustable flanged toe allows for an additional 1-1/8" (28mm) height adjustment
  • 2-3 Day Lead Time
  • NSF Approved
Learn More

Zamak Finished Hex Adjustable Foot Insert for 1-5/8" (41mm) O.D. Round Tubing 16 GA. (1.5mm) A10-0811-C

Zamak Finished Hex Adjustable Foot Insert for 1-5/8" (41mm) O.D. Round Tubing 16 GA. (1.5mm)

$3.36

Mfg : CHG

Model No. : A10-0811-C

eRestaurantParts No.: 40332

Units : Each

  • Zamak Finished Hex Adjustable Bullet Foot Insert for 1-5/8" (41mm) O.D. Round Tubing 16 GA. (1.5mm)
  • Height (when installed): 1-1/4" (32mm)
  • Adjustable hex toe permits 1-1/8" (28mm) height adjustment
  • Natural Finish Zamak
  • Load Rating of 2000 lb/ft (900)kg/ft.
  • NSF Approved
Learn More

Thermoplastic Black Hex Adjustable Foot Insert for Round 1-5/8" (41mm) O.D. Tubing 16 GA. (1.5mm) A10-0831-C

Thermoplastic Black Hex Adjustable Foot Insert for Round 1-5/8" (41mm) O.D. Tubing 16 GA. (1.5mm)

$1.76

Mfg : CHG

Model No. : A10-0831-C

eRestaurantParts No.: 40334

Units : Each

  • Thermoplastic Black Hex Foot Insert for Round 1-5/8" (41mm) O.D. Tubing 16 GA. (1.5mm)
  • Height (when installed): 1-3/8" (35mm)
  • Adjustable hex toe permits 1-1/16" (27mm) height adjustment
  • Thermoplastic Black
  • Load Rating of 200 lb/ft (90)kg/ft.
  • NSF Approved
Learn More

Thermoplastic Gray Adjustable Hex Foot Insert for Round 1-5/8" O.D. (41mm) Tubing 16 GA. (1.5mm) A10-0841-C

Thermoplastic Gray Adjustable Hex Foot Insert for Round 1-5/8" O.D. (41mm) Tubing 16 GA. (1.5mm)

$1.20

Mfg : CHG

Model No. : A10-0841-C

eRestaurantParts No.: 40336

Units : Each

  • Stainless Steel Adjustable Hex Foot Insert for 1-5/8" (41mm) O.D. Round Tubing 16 GA. (1.5mm)
  • Adjustable hex toe permits an additional 1-1/6" (27mm) height adjustment
  • Stainless Steel Clad
  • Height (when installed): 1-3/8" (35mm)
  • Load Rating of 200 lb/ft (90)kg/ft.
  • Recommended for Round Tubing and Pipe.
  • NSF Approved
Learn More

Stainless Steel Adjustable Hex Foot Insert for 1-5/8" (41mm) O.D. Tubing 16 GA. (1.5mm) A10-0851-C

Stainless Steel Adjustable Hex Foot Insert for 1-5/8" (41mm) O.D. Tubing 16 GA. (1.5mm)

$3.96

Mfg : CHG

Model No. : A10-0851-C

eRestaurantParts No.: 40338

Units : Each

  • Stainless Steel Clad Foot Insert for 1-5/8" Round Tubing with adjustable Hex toe.
  • Stainless Steel Clad
  • Height (when installed): 1-1/2" (38mm)
  • Adjustable hex toe permits an additional 1-1/4" height adjustment
  • Load Rating of 2000 lb/ft (90)kg/ft.
  • Recommended for Round Tubing and Pipe
  • Picture shown with optional Posi-Grip Locking Ring (A10-0010-C)
  • NSF Approved
Learn More

Stainless Steel Adjustable Round Foot Insert for 1-5/8" (41mm) O.D. Round Tubing 16 GA. (1.5mm) A10-0852-C

Stainless Steel Adjustable Round Foot Insert for 1-5/8" (41mm) O.D. Round Tubing 16 GA. (1.5mm)

$4.55

Mfg : CHG

Model No. : A10-0852-C

eRestaurantParts No.: 40342

Units : Each

  • Stainless Steel Clad Foot Insert for 1-5/8" Round Tubing with adjustable round toe
  • Height (when installed): 1-1/2" (38mm)
  • Adjustable round toe permits 1-1/4" height adjustment
  • Stainless Steel Clad
  • Load Rating of 2000 lb/ft (90)kg/ft.
  • Recommended for Round Tubing and Pipe
  • NSF Approved
Learn More

Stainless Steel Clad Zamak Adjustable Seismic Restraint Bullet Foot for 1-5/8" (41mm) O.D. Tubing 16 GA. (1.5mm) A10-0852-S

Stainless Steel Clad Zamak Adjustable Seismic Restraint Bullet Foot for 1-5/8" (41mm) O.D. Tubing 16 GA. (1.5mm)

$8.68

Mfg : CHG

Model No. : A10-0852-S

eRestaurantParts No.: 40344

Units : Each

  • Stainless Steel Clad Zamak Adjustable Foot Insert
  • For 1-5/8" (41mm) O.D. Tubing - 16 Gauge (1.5mm)
  • 7/16" Diameter hole in the bottom of toe permits secure anchoring to re-bar in floor
  • Meets SMACNA guidelines for seismic restraint of equipment
  • Stainless Steel Clad Zamak construction will not corrode
  • Height (when installed): 1-1/2" (38mm)
  • Adjustable round toe permits 1-1/4" height adjustment
  • Diameter of Hole: 7/16" (.44mm)
  • Static load rating of 2000lbs (900Kg)
  • Add the Posi-Grip Locking Ring (A10-0010-C) for added pull-out strength
Learn More

Stainless Steel Flanged Adjustable Foot Insert 1-5/8" (41mm) O.D. Round Tubing 16 GA. (1.5mm) - No Mounting Holes

Stainless Steel Flanged Adjustable Foot Insert for 1-5/8" (41mm) O.D. Round Tubing 16 GA. (1.5mm) - No Mounting Holes

$10.12

Mfg : CHG

Model No. : A10-0853-C

eRestaurantParts No.: 40346

Units : Each

  • Stainless Steel Flanged Adjustable Foot Insert for 1-5/8" (41mm) O.D. Round Tubing 16 GA. (1.5mm) - No Mounting Holes
  • Diameter: 3-1/2" (89mm)
  • Load Rating: 2000lbs (900Kg)
  • Height (when installed): 1-1/2" (38mm)
  • Adjustable flanged toe permits and additional 1-1/8" (28mm) height adjustment
  • NSF Approved
Learn More

Stainless Steel Flanged Adjustable Foot Insert 1-5/8" (41mm) O.D. Round Tubing 16 GA. (1.5mm) - With Mounting Holes A10-0854-C

Stainless Steel Flanged Adjustable Foot Insert for 1-5/8" (41mm) O.D. Round Tubing 16 GA. (1.5mm) - With Mounting Holes

$10.66

Mfg : CHG

Model No. : A10-0854-C

eRestaurantParts No.: 40348

Units : Each

  • Stainless Steel Flanged Adjustable Foot Insert for 1-5/8" (41mm) O.D. Round Tubing 16 GA. (1.5mm) - With Mounting Holes
  • Diameter: 3-1/2" (89mm)
  • Load Rating: 2000lbs (900Kg)
  • Height (when installed): 1-1/2" (38mm)
  • Adjustable flanged toe permits and additional 1-1/8" (28mm) height adjustment
  • NSF Approved
Learn More

Hi-Rise® Stainless Steel Adjustable Hex Foot Insert for 1-5/8" (41mm) O.D. Round Tubing - 16 GA. A10-0881-C

Hi-Rise® Stainless Steel Adjustable Hex Foot Insert for 1-5/8" (41mm) O.D. Round Tubing - 16 GA.

$23.20

Mfg : CHG

Model No. : A10-0881-C

eRestaurantParts No.: 40350

Units : Each

  • Stainless Steel Adjustable Foot Insert with Hex Toe
  • For 1-5/8" (41mm) O.D. Tubing - 16 Gauge
  • Height (when installed): 1-1/2" (38mm)
  • Adjustable: 3" (75mm) - Hex Toe unscrews for a 3" extended adjustment
  • NSF Listed
  • Rugged 2000lb (900Kg) Load Rating
  • Ideal for lengthy cafeteria lines and counters where floor pitch is a concern
  • Eliminates costly field modification
  • Maximum height adjustment helps avoid plumbing obstacles and other unforeseen conditions during installation of equipment
Learn More

Hi-Rise® Stainless Steel Adjustable Foot Insert with Flanged Toe for 1-5/8" (41mm) O.D. Round Tubing - 16 GA. A10-0884-C

Hi-Rise® Stainless Steel Adjustable Foot Insert with Flanged Toe for 1-5/8" (41mm) O.D. Round Tubing - 16 GA.

$30.92

Mfg : CHG

Model No. : A10-0884-C

eRestaurantParts No.: 40352

Units : Each

  • Stainless Steel Adjustable Foot Insert with Flanged Toe
  • For 1-5/8" (41mm) O.D. Tubing - 16 Gauge
  • Furbished with Two (2) 11/32" (9mm) Diameter Mounting Holes
  • Height (when installed): 1-1/2" (38mm)
  • Adjustable: 3" (75mm) - Flanged Toe unscrews for a 3" extended adjustment
  • NSF Listed
  • Rugged 2000lb (900Kg) Load Rating
  • Ideal for lengthy cafeteria lines and counters where floor pitch is a concern
  • Eliminates costly field modification
  • Maximum height adjustment helps avoid plumbing obstacles and other unforeseen conditions during installation of equipment
Learn More

Reinforced Plastic Adjustable Hex Foot Insert for 1-5/8" (41mm) O.D. Tubing 16 GA. & 18 GA. A10-1000

Reinforced Plastic Adjustable Hex Foot Insert for 1-5/8" (41mm) O.D. Tubing 16 GA. & 18 GA.

$3.01

Mfg : CHG

Model No. : A10-1000

eRestaurantParts No.: 40354

Units : Each

  • Reinforced Plastic with Stainless Steel Clad Bottom Foot Insert with Hex type toe
  • Stainless Steel type 304
  • Unique threading offers smooth, fast field adjustment
  • Each model designed to suit 1-5/8" (41mm) O.D. Round Tubing either 16 (1.5mm) or 18 (1.2mm) Gauge
  • Specially designed engineered plastic construction withstands today's harsh chemical cleansers in commercial kitchen environments
  • Height: 1-1/2" (38mm)
  • Adjustable: 1-1/4" (32mm)
  • Load Rating: 1000lbs. (450Kg)
  • Economical
  • NSF Listed
Learn More

Reinforced Plastic Adjustable Hex Foot Insert for 1-1/2" (38mm) O.D. Tubing 16 GA. & 18 GA. A10-1500

Reinforced Plastic Adjustable Hex Foot Insert for 1-1/2" (38mm) O.D. Tubing 16 GA. & 18 GA.

$4.84

Mfg : CHG

Model No. : A10-1500

eRestaurantParts No.: 40356

Units : Each

  • Reinforced Plastic with Stainless Steel Clad Bottom Foot Insert with Hex type toe
  • Stainless Steel type 304
  • Unique threading offers smooth, fast field adjustment
  • Each model designed to suit 1-1/2" (38mm) O.D. Round Tubing either 16 (1.5mm) or 18 (1.2mm) Gauge
  • Specially designed engineered plastic construction withstands today's harsh chemical cleansers in commercial kitchen environments
  • Height: 1-1/2" (38mm)
  • Adjustable: 1-1/4" (32mm)
  • Load Rating: 1000lbs. (450Kg)
  • Economical
  • NSF Listed
Learn More

Stainless Steel Flanged Adjustable Foot Insert 1-5/8" (41mm) O.D. Round Tubing For Marine Application 16 GA. (1.5mm) - No Mounting Holes A10-9904-C

Stainless Steel Flanged Adjustable Foot Insert for 1-5/8" (41mm) O.D. Round Tubing For Marine Application 16 GA. (1.5mm) - No Mounting Holes

$17.12

Mfg : CHG

Model No. : A10-9904-C

eRestaurantParts No.: 40358

Units : Each

  • Stainless Steel Flanged Adjustable Foot Insert for 1-5/8" O.D. Round Tubing 16 GA. (1.5mm) for Marine Application
  • Furnished with Mounting Holes
  • Diameter: 2" (50mm)
  • Load Rating: 2000lbs. (900Kg)
  • Height (when installed): 1-1/2" (38mm)
  • Adjustable Flanged toe allows for an additional 1-1/8" (28mm) height adjustment
  • NSF Approved
  • Shown with optional Posi-Grip Locking Ring (A10-0010-C)
Learn More

Stainless Steel Flanged Adjustable Foot Insert 2"  (50mm) O.D. Round Tubing 16 GA. (1.5mm) - With Mounting Holes A11-0854-C

Stainless Steel Flanged Adjustable Foot Insert for 2" (50mm) O.D. Round Tubing 16 GA. (1.5mm) - With Mounting Holes

$24.32

Mfg : CHG

Model No. : A11-0854-C

eRestaurantParts No.: 40362

Units : Each

  • Stainless Steel Flanged Adjustable Foot Insert for 2" (50mm) O.D. Round Tubing 16 GA. (1.5mm) - With Mounting Holes
  • Adjustable: 1-1/8" (28mm)
  • Diameter: 3-1/2" (89mm)
  • Load Rating: 2300lbs (1040Kg)
  • Height: 1" (25mm)
  • NSF Approved
Learn More

Nickel Plated Zamak Adjustable Hex Foot Insert for 1" (25mm) Square Tubing - 16 GA. or 18 GA. A14-0221-C

Nickel Plated Zamak Adjustable Hex Foot Insert for 1" (25mm) Square Tubing - 16 GA. or 18 GA.

$7.24

Mfg : CHG

Model No. : A14-0221-C

eRestaurantParts No.: 40364

Units : Each

  • Nickel Plated Zamak Adjustable Hex Foot Insert
  • For 1" (25mm) Square Tubing 16GA. (1.5mm) 18 GA. (1.2mm)
  • Adjustable: 7/8" (22mm)
  • Load Rating: 1200lbs (550Kg)
  • Height: 11/16" (17.5mm)
  • NSF Approved
  • 2 Day Lead Time
Learn More

Items 1 to 25 of 327 total

Set Descending Direction
per page

Grid  List 

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5