AB-1953 - Low Lead

Don't see what you're looking for in the AB1953 Low-Lead Category? Contact Us.


NSF Component Symbol

Items 1 to 25 of 30 total

Set Descending Direction
per page

Grid  List 

Page:
  1. 1
  2. 2
Low Lead - Encore® Variable Flow Pre-Rinse Spray Head - KLF-Y104

Low Lead - Encore® Variable Flow Pre-Rinse Spray Head

$179.00

Mfg : Encore®

Model No. : KLF-Y104

eRestaurantParts No.: 40005

Units : Each

  • Heavy duty Pre-Rinse offers flexibility, durability and efficiency
  • Select from 3 low-flow spray patterns simply by rotating the bumper
  • Spray assembly is interchangeable with all makes of pre-rinses
  • Spray head hook holds spray head away from work area when not in use
  • Heat resistant, non-marring, impact resistant bumper will not fatigue under extreme operating temperatures
  • Stainless Steel non-clogging nozzles for durability, reliability and low maintenance
  • Exceeds Federal Energy Management Program efficiency requirement of 1.25gpm and less than 26 seconds per plate
  • Up to 62% more efficient than competitive pre-rinse spray heads
  • Flow rate and clean-ability performance documented by Food Service Technology Center
  • 15° fan spray consumes less than .59gpm for most cleaning applications
  • Straight stream spray uses .71gpm for heavy duty cleaning
  • 25 degree fan spray for light rinsing consumes 1.14gpm
  • Low Lead Compliant
  • Polished chrome plated brass body with total lead content less than 0.25% by weighted average
  • Stainless Steel nozzle tips
  • Celcon® spray face and Santoprene® bumper
  • Certified to NSF 61/9 Annex G- meets requirements of US Safe Water Drinking Act
  • Kool Grip™ Hose Grip - Reduces heat transfer to the hand; stays up to 30° cooler than competitors' grips
  • Ergonomic spray handle fits comfortable in even small hands and is easy to use
  • SANIGUARD® treated on all touch points of the plumbing fixture
  • Inorganic, silver ion technology inhibits growth of common bacteria, yeasts, mod and fungi, minimizes cross-contamination
  • Operating Temperature: 40-180°F (5-83°C)
  • Operating Pressure: 15-125psi
  • California's AB1953 Compliant & Vermont S-152
  • Certified to NSF/ANSI 61 Section 9-G Standards for Low Lead.
  • A.D.A. Compliant
KLF-Y104-A Specifications (PDF) Learn More

Low Lead - Swivel Gooseneck Replacement Spout - Length: 3-1/2" (90mm) - KL11-X000

Low Lead - Swivel Gooseneck Replacement Spout - Length: 3-1/2" (90mm) (formerly KN11-X000 and KL11-X000)

$21.74

Mfg : Encore®

Model No. : KS11-12-X000

eRestaurantParts No.: 43290

Units : Each

  • Low Lead - Swivel Gooseneck Replacement Spout
  • Spout Length: 3-1/2" (89mm)
  • California's AB1953 Compliant & Vermont S-152
  • Certified to NSF/ANSI 61 Section 9-G Standards for Low Lead.
Learn More

Low Lead - Swivel Gooseneck Replacement Spout - Length: 8-1/2" (215mm)

Low Lead - Swivel Gooseneck Replacement Spout - Length: 8-1/2" (215mm)

$42.27

Mfg : Encore®

Model No. : KL11-X001

eRestaurantParts No.: 43292

Units : Each

  • Low Lead - Swivel Gooseneck Replacement Spout
  • Spout Length: 8-1/2" (215mm)
  • California's AB1953 Compliant & Vermont S-152
  • Certified to NSF/ANSI 61 Section 9-G Standards for Low Lead.
Learn More

Low Lead - Swivel Gooseneck Replacement Spout - Length: 6" (152mm) - KL11-X002

Low Lead - Swivel Gooseneck Replacement Spout - Length: 6" (152mm)

$38.57

Mfg : Encore®

Model No. : KL11-X002

eRestaurantParts No.: 43294

Units : Each

  • Low Lead - Swivel Gooseneck Replacement Spout
  • Spout Length: 6" (152mm)
  • California's AB1953 Compliant & Vermont S-152
  • Certified to NSF/ANSI 61 Section 9-G Standards for Low Lead.
Learn More

Low Lead - Replacement Straight Swing Spout - (Lengths: 6", 8", 10", 12", 14" & 16") - KL11-X006, KL11-X008, KL11-X010, KL11-X012

Low Lead - Replacement Straight Swing Spout - (Lengths: 6", 8", 10", 12", 14", 16" & 18")

Starting at: $29.57

Mfg : Encore®

Model No. : KL11-X0xx

eRestaurantParts No.: 43296-43308

Units : Each

  • Low Lead - Straight Replacement Swing Spout
  • Spout Lengths: 6" (150mm), 8" (200mm), 10" (250mm), 12" (300mm), 14" (350mm), 16" (400mm) & 18" (450mm)
  • Highly polished Chrome plated Brass
  • California's AB1953 Compliant & Vermont S-152
  • Certified to NSF/ANSI 61 Section 9-G Standards for Low Lead.
Learn More

Low Lead - Single Pantry Faucet with 3-1/2" (90mm) Swivel Gooseneck Spout KL20-8031

Low Lead - Single Pantry Faucet with 3-1/2" (90mm) Swivel Gooseneck Spout

$97.48

Mfg : Encore®

Model No. : KL20-8031

eRestaurantParts No.: 43332

Units : Each

  • Low Lead - Single Pantry Faucet with Swivel Gooseneck Spout
  • Spout Length: 3-1/2" (90mm)
  • Comes with Mounting Hardware
  • Furnished with 1/2" NPS Male Inlet
  • California's AB1953 Compliant & Vermont S-152
  • Certified to NSF/ANSI 61 Section 9-G Standards for Low Lead.
Learn More

Low Lead - Deck Mounted Glass Filler KL26-5000

Low Lead - Deck Mounted Glass Filler (formerly KN26-5000)

$86.40

Mfg : Encore®

Model No. : KL26-5000

eRestaurantParts No.: 43336

Units : Each

  • Low Lead - Deck Mounted Glass Filler
  • Two position lever arm - Push back for easy filling or rotate upward for continuous flow
  • Highly polished Chrome plated Brass
  • Furnished with 1/2" NPS Male inlet
  • Comes with Mounting Hardware
  • Internal feature allows for splash-free operation
  • California's AB1953 Compliant & Vermont S-152
  • Certified to NSF/ANSI 61 Section 9-G Standards for Low Lead.
Learn More

Low Lead - Dipper Well Assembly Complete with Faucet KL30-1010

Low Lead - Dipper Well Assembly Complete with Faucet

$139.54

Mfg : Encore®

Model No. : KL30-1010

eRestaurantParts No.: 43338

Units : Each

  • Low Lead - Stainless Steel Dipperwell Assembly complete with Faucet
  • Fits into 6" (150mm) diameter opening
  • Type 18-8 Stainless Steel inner and outer shell
  • 9-1/2" (240mm) overall length
  • Complete with Stainless Steel drain and 1-1/2" (38mm) O.D. x 4" (100mm) long Brass Nickel plated tailpiece
  • Highly polished Chrome plated faucet
  • Only 4" Faucet with built-in check valves to prevent back flow and offer positive seal
  • International color coded Hot and Cold identifiers provided
  • Polish Chrome Plated Cast Brass Faucet Body
  • Certified to NSF/ANSI 61 Section 9-G Standards for Low Lead (ANSI A112.18.1M)
  • California's AB1953 & Vermont S-152 Compliant
Learn More

Low Lead - Wall Faucet Mounting Kit KL40-1000

Low Lead - Wall Faucet Mounting Kit

$28.93

Mfg : Encore®

Model No. : KL40-1000

eRestaurantParts No.: 43340

Units : Each

  • Designed for simple installation of wall faucets within the standard back-splash space.
  • Contains two each of 1/2" NPS nipples
  • 1/2" NPT x 1/2" sweat ells
  • Washers and Locknuts
  • California's AB1953 Compliant & Vermont S-152
  • Certified to NSF/ANSI 61 Section 9-G Standards for Low Lead
Learn More

Low Lead - Encore­® Hand Sink Deck Mount Faucet with Swivel Gooseneck Spout KL41-4002

Low Lead - Encore­® Hand Sink Deck Mount Faucet with 6" Swivel Gooseneck Spout (formerly KN41-4002)

$117.38

Mfg : Encore®

Model No. : KL41-4002

eRestaurantParts No.: 43350

Units : Each

  • Low Lead - Encore­® Hand Sink Deck Mount Faucet with Swivel Gooseneck Spout
  • 4" Centers
  • SANIGUARD® treated lever handles
  • Spout Length: 6" (152mm)
  • Aerator: 2.2 gpm @ 60 psi max
  • 1/2" NPSM Inlet
  • Built-in check valve
  • Color coded Hot & Cold
  • Comes with Mounting Hardware
  • California's AB1953 Compliant & Vermont S-152
  • Certified to NSF/ANSI 61 Section 9-G Standards for Low Lead (formerly KN41-4002).
Learn More

Low Lead - Encore­® Wall Mount Faucet with 6" Swivel Gooseneck Spout and 4" Centers KL45-4002

Low Lead - Encore­® Wall Mount Faucet with 6" Swivel Gooseneck Spout and 4" Centers (formerly KN45-4002)

$177.79

Mfg : Encore®

Model No. : KL45-4002

eRestaurantParts No.: 43352

Units : Each

  • Low Lead - Encore­® Wall Mount Faucet with 6" Swivel Gooseneck Spout and 4" Centers
  • Spout Length: 6" (152mm)
  • Aerator: 2.2 gpm @ 60 psi max
  • NSF Listed
  • 1/2" NPSM Inlet
  • New easy 1/4 turn full open feature exceeds A.D.A. regulations with handles mounted in correct orientation
  • Only 4" Faucet with built-in check valves to prevent back flow and offer positive seal
  • International color coded Hot and Cold identifiers provided
  • Polish Chrome Plated Cast Brass Faucet Body
  • Full flow stream bubbler included
  • SANIGUARD® treated lever handles
  • Certified to NSF/ANSI 61 Section 9-G Standards for Low Lead (ANSI A112.18.1M)
  • California's AB1953 & Vermont S-152 Compliant
Learn More

Low Lead - Encore­­® Deck Mount Pre-Rinse Assembly without Wall Bracket KL50-1000

Low Lead - Encore­­® Deck Mount Pre-Rinse Assembly without Wall Bracket

$426.57

Mfg : Encore®

Model No. : KL50-1000

eRestaurantParts No.: 43366

Units : Each

  • Low Lead - Encore® Pre-Rinse Assembly.
  • Deck mount, 4" (100mm) centers
  • SANIGUARD® treated lever handles.
  • Flexible hose w/ spring, built-in check valve and mounting hardware included
  • 1/2" NPS Male Inlet.
  • 1/4" NPT Union Tailpieces
  • Operating Temperature: 40-180­­° F
  • Operating Pressure: 15-125psi
  • Pre-Rinse Assembly is approximately 38" (965mm) high
  • Clearance height from underside of Pre-Rinse Spray to center-line of faucet is 10" (254mm).
  • Overhang projection distance from center-line of faucet to center-line of spray head assembly is 15" (381mm).
  • California's AB1953 Compliant & Vermont S-152
  • Certified to NSF/ANSI 61 Section 9-G Standards for Low Lead.

Low Lead - Encore® Deck Mount Pre-Rinse Assembly with Wall Bracket and 12" Add-On Faucet KL50-1000-AF4

Low Lead - Encore® Deck Mount Pre-Rinse Assembly with Wall Bracket and 12" Add-On Faucet

$525.03

Mfg : Encore®

Model No. : KL50-1000-AF4

eRestaurantParts No.: 43374

Units : Each

  • Low Lead - Encore® Pre-Rinse Assembly.
  • Deck mount, 4" (102mm) centers
  • Flexible hose with spring
  • 12" Add-On Faucet
  • Built-in Check Valve
  • Base Faucet Material: Chrome Plated Low Lead Brass
  • Single Hole Inlet Center
  • Operating Temperature: 40 - 180°F
  • Operating Pressure: 15-125psi
  • 1/2" Supply Inlet Size
  • Furnished with Compression Valves
  • Handle Style: Standard Lever Handles
  • Chrome Plated Steel Spring
  • 18" Riser and Wall Bracket Included
  • Low-Flow Spray Valve provides 3 different faces as standard. 3.3GPM (Full Spray), 1.6GPM (Flat Spray), 1.2GPM (Low-Flow Spray)
  • Wall Hook helps to keep the Spray Head away from the work are while not in use
  • 3-Ply Nylon reinforced Santoprene® inner hose provides maximum durability
  • Patented stainless steel strain relief spring transfers and distributes load stress to significantly improve hose life
  • High pressure hydraulic fittings on hose ends tested to 400psi
  • Washerless design incorporates temperature resistant O-rings to provide leak-proof seal on all hose assemblies and hose grips
  • Kool Grip™ Hose Grip reduces heat transfer to hands and stays 30° Cooler than Competitors' grips.
  • Manufacture 3-Year Warranty
  • 1-1/2" hole for deck is recommended to accommodate 1/2" supply nipples
  • 1/2" NPT Female Inlets
  • California's AB1953 Compliant & Vermont S-152
  • Certified to NSF/ANSI 61 Section 9-G Standards for Low Lead.
Learn More

Low Lead - Encore­­® Deck Mount Pre-Rinse Assembly with Wall Bracket KL50-1000-BR

Low Lead - Encore­­® Deck Mount Pre-Rinse Assembly with Wall Bracket

$457.78

Mfg : Encore®

Model No. : KL50-1000-BR

eRestaurantParts No.: 43382

Units : Each

  • Low Lead - Encore® Pre-Rinse Assembly.
  • Deck mount, 4" (100mm) centers
  • SANIGUARD® treated lever handles.
  • Flexible hose with spring
  • Built-in Check Valve
  • 1/2" NPS Male Inlet.
  • 1/4" NPT Union Tailpieces and Mounting Hardware included
  • Operating Temperature: 40 - 180°F
  • Operating Pressure: 15-125psi
  • Pre-Rinse Assembly is approximately 38" (965mm) high
  • Clearance height from underside of Pre-Rinse Spray to center-line of faucet is 10" (254mm).
  • Overhang projection distance to center-line of faucet to center-line of spray head assembly is 15" (381mm).
  • California's AB1953 Compliant & Vermont S-152
  • Certified to NSF/ANSI 61 Section 9-G Standards for Low Lead.
Learn More

Low Lead - Encore® 1/4 Turn Cold Valve Assembly KL50-Y006

Low Lead - Encore® 1/4 Turn Cold Valve Assembly (formerly KN50-Y006)

$30.44

Mfg : Encore®

Model No. : KL50-Y006

eRestaurantParts No.: 43492

Units : Each

  • Low Lead - Encore® Replacement Cold Valve Assembly
  • 1/4 Turn compression cartridge valve
  • Furnished with long barrel
  • Fits most KN50/KL50, KN60/KL60, KN80/KL80 Series Faucets
  • California's AB1953 Compliant & Vermont S-152
  • Certified to NSF/ANSI 61 Section 9-G Standards for Low Lead
Learn More

Low Lead - Encore® 1/4 Turn Hot Valve Assembly KL50-Y007

Low Lead - Encore® 1/4 Turn Hot Valve Assembly

$30.44

Mfg : Encore®

Model No. : KL50-Y007

eRestaurantParts No.: 43500

Units : Each

  • Low Lead - Encore® Replacement Hot Valve Assembly
  • 1/4 Turn compression cartridge valve
  • Furnished with long barrel
  • Fits most KN50/KL50, KN60/KL60, KN80/KL80 Series Faucets
  • California's AB1953 Compliant & Vermont S-152
  • Certified to NSF/ANSI 61 Section 9-G Standards for Low Lead
Learn More

Low Lead - Encore® Wall Mount Pre-Rinse Assembly with Wall Bracket KL53-1000-BR

Low Lead - Encore® Wall Mount Pre-Rinse Assembly with Wall Bracket (formerly KN53-1000-BR)

$400.75

Mfg : Encore®

Model No. : KL53-1000-BR

eRestaurantParts No.: 43654

Units : Each

  • Low Lead - Encore® Pre-Rinse Assembly
  • With wall bracket, 8" (200mm) adjustable centers
  • Polished Chrome plated Brass
  • Patented O-Rings Seals
  • 1/4 Turn Compression valves
  • SANIGUARD® treated lever handles
  • Flexible hose with spring
  • Available with Ceramic Valves - use model number KN50-1100
  • 1/2" NPS Female Inlet
  • Built-in Check Valve and Mounting Hardware
  • Hold open ring and hose hook included
  • Pre-Rinse Assembly is approximately 35" (890mm) high
  • Clearance height from underside of Pre-Rinse Spray to center-line of faucet is 7" (178mm).
  • Distance from overhang projection to center-line of faucet to center-line of spray head assembly is 15" (381mm)
  • A.D.A. Compliant
  • California's AB1953 Compliant & Vermont S-152
  • Certified to NSF/ANSI 61 Section 9-G Standards for Low Lead
Learn More

Low Lead - Encore® Wall Mount Faucet with 3.5" Gooseneck Spout KL54-8000

Low Lead - Encore® Wall Mount Faucet with 3.5" Gooseneck Spout

$199.35

Mfg : Encore®

Model No. : KL54-8000

eRestaurantParts No.: 43664

Units : Each

  • Low Lead - Encore­® Wall Mount Faucet with 3.5" Gooseneck Spout
  • Polished Chrome plated cast Brass faucet body
  • 8" Adjustable Centers
  • SANIGUARD® treated lever handles
  • Spout Length: 3.5" (89mm)
  • Double O-Ring swivel gooseneck spout with 2.2 GPM Aerator
  • 1/4 Turn compression valves with check valve
  • Full flow stream bubbler included
  • Gasket and Seals rated commercial hot 180°F
  • 1/2" NPT Female Inlets
  • Operating Pressure: 15 - 125psi
  • Color coded Hot & Cold
  • Operating Temperature: 40 - 180°F
  • California's AB1953 Compliant & Vermont S-152
  • Certified to NSF/ANSI 61 Section 9-G Standards for Low Lead.
  • Complies with CSA B125, ANSI A112.18.1M & A.D.A.
Learn More

Low Lead - Encore® Wall Mount Faucet with 8" Adjustable Centers and 10" Swing Spout KL54-8010

Low Lead - Encore® Wall Mount Faucet with 8" Adjustable Centers and 10" Swing Spout

$206.32

Mfg : Encore®

Model No. : KL54-8010

eRestaurantParts No.: 43682

Units : Each

  • Low Lead - Encore­® Wall Mount Faucet with 10" Gooseneck Spout
  • Polished Chrome plated cast Brass faucet body
  • 8" Adjustable Inlet Centers
  • SANIGUARD® treated lever handles
  • Spout Length: 10" (254mm)
  • O-Ring seals with 2.2 GPM @ 60psi Aerator
  • 1/4 Turn compression valves with check valve
  • Full flow stream bubbler included
  • Gasket and Seals rated commercial hot 180°F
  • 1/2" NPT Female Inlets
  • Operating Pressure: 15 - 125psi
  • Color coded Hot & Cold
  • Operating Temperature: 40 - 180°F
  • California's AB1953 Compliant & Vermont S-152
  • Certified to NSF/ANSI 61 Section 9-G Standards for Low Lead.
  • Complies with CSA B125, ANSI A112.18.1M & A.D.A.
Learn More

Low Lead - Encore® Wall Mount Faucet with 8" Adjustable Centers and 12" Swing Spout KL54-8012

Low Lead - Encore® Wall Mount Faucet with 8" Adjustable Centers and 12" Swing Spout (formerly KN54-8012)

$150.00

Mfg : Encore®

Model No. : KL54-8012

eRestaurantParts No.: 43686

Units : Each

  • Low Lead - Encore­® Wall Mount Faucet with 12" Swing Spout
  • Polished Chrome plated cast Brass faucet body
  • 8" Adjustable Inlet Centers
  • SANIGUARD® treated lever handles
  • Spout Length: 12" (305mm)
  • O-Ring seals with 2.2 GPM @ 60psi Aerator
  • 1/4 Turn compression valves with check valve
  • Full flow stream bubbler included
  • Gasket and Seals rated commercial hot 180°F
  • 1/2" NPT Female Inlets
  • Operating Pressure: 15 - 125psi
  • Color coded Hot & Cold
  • Operating Temperature: 40 - 180°F
  • California's AB1953 Compliant & Vermont S-152
  • Certified to NSF/ANSI 61 Section 9-G Standards for Low Lead.
  • Complies with CSA B125, ANSI A112.18.1M & A.D.A.
Learn More

Low Lead Single Wall Mount Pre-Rinse Assembly with Wall Bracket - KL71-1000-BR

Low Lead Single Wall Mount Pre-Rinse Assembly with Wall Bracket

$283.96

Mfg : Encore®

Model No. : KL71-1000-BR

eRestaurantParts No.: 44168

Units : Each

Low Lead Single Wall Mount Pre-Rinse Assembly with built-in check valve and Wall Bracket. Furnished with 1/2" NPT female inlet & 1/2" Nipple "ell". Flexible hose with spring. Mounting kit included. SANIGUARD treated. Low Lead Compliant. Learn More

Low Lead - Encore® Pre-Rinse Hose Assembly with Grip (Various Sizes) KL50-Y004-xx

Low Lead - Encore® Pre-Rinse Hose Assembly with Grip (Various Sizes)

Starting at: $49.97

Mfg : Encore®

Model No. : KL50-Y004-xx

eRestaurantParts No.: 45288-45322

Units : Each

  • LOW LEAD - Encore® Pre-Rinse Hose Assembly with Grip
  • Constructed with a strong, flexible Stainless Steel outer casing over a Nylon reinforced rubber core
  • Encore® Pre-Rinse Hose has been specially designed to significantly minimize any incidence of failure
  • Extra added strain relief coil of .125" (3mm) diameter Chrome plated wire which transfers the stress away from the part of the hose most subject to flexing and distributes it evenly over an extended area adding significantly to the life of the hose
  • SANIGUARD® treated grip
  • NSF Approved
  • Available in 20", 26", 44", 60", 72" & 96" Lengths
  • California's AB1953 Compliant & Vermont S-152
  • Certified to NSF/ANSI 61 Section 9-G Standards for Low Lead.
Learn More

Low Lead - Encore® Pre-Rinse Hose Assembly (Various Sizes) KL50-Y010-20, KL50-Y010-26, KL50-Y010-44, KL50-Y010-60, KL50-Y010-72, KL50-Y010-96

Low Lead - Encore® Pre-Rinse Hose Assembly (Various Sizes)

Starting at: $51.39

Mfg : Encore®

Model No. : KL50-Y010-xx

eRestaurantParts No.: 45346-45356

Units : Each

  • LOW LEAD - Encore® Pre-Rinse Hose Assembly
  • Constructed with a strong, flexible Stainless Steel outer casing over a Nylon reinforced rubber core
  • Encore® Pre-Rinse Hose has been specially designed to significantly minimize any incidence of failure
  • Extra added strain relief coil of .125" (3mm) diameter Chrome plated wire, which transfers the stress away from the part of the hose most subject to flexing and distributes it evenly over an extended area adding significantly to the life of the hose
  • NSF Approved
  • See Model No. KN50-X025 for Grip only
  • Available in 14", 20", 38", 54", 66" & 90" Lengths
  • California's AB1953 Compliant & Vermont S-152
  • Certified to NSF/ANSI 61 Section 9-G Standards for Low Lead.
Learn More

Low Lead - Deck Mount Faucet with 4" Centers and Swivel Gooseneck Spout

Low Lead - Deck Mount Faucet with 4" Centers and Swivel Gooseneck Spout

$85.00

Mfg : Encore®

Model No. : KL11-4000

eRestaurantParts No.: 49044

Units : Each

  • Low Lead - Deck Mount Faucet with Swivel Gooseneck Spout
  • 4" (100mm) Centers (Distance between Hot and Cold)
  • Spout Length: 3-1/2" (89mm)
  • California's AB1953 Compliant & Vermont S-152
  • Certified to NSF/ANSI 61 Section 9-G Standards for Low Lead.
Learn More

Low Lead - Deck Mount Faucet with 4" Centers and Swing Spout

Low Lead - Deck Mount Faucet with 4" Centers and Swing Spout

$92.45

Mfg : Encore®

Model No. : KL11-4012

eRestaurantParts No.: 49046

Units : Each

  • Low Lead - Deck Mount Faucet with 4" Centers and Swing Spout
  • 4" (100mm) Centers (Distance between Hot and Cold)
  • Spout Length: 12" (305mm)
  • California's AB1953 Compliant & Vermont S-152
  • Certified to NSF/ANSI 61 Section 9-G Standards for Low Lead.
Learn More

Items 1 to 25 of 30 total

Set Descending Direction
per page

Grid  List 

Page:
  1. 1
  2. 2