Refrigeration Hardware

Items 1 to 25 of 26 total

Set Descending Direction
per page

Grid  List 

Page:
  1. 1
  2. 2
Retainer Strip - 96" Straight Lengths

Retainer Strip - 96" Straight Lengths

$8.65

Mfg : Industrial

Model No. : 20-001-96

eRestaurantParts No.: 20040

Units : Each

  • Retainer Strip for foamed in place insulation
  • 96" (8 Foot) Long Straight Lengths
  • Ideal for use with Model # 3095962W
Learn More

Steel Flat Bearing w/ Rivet - 1" Dia. - 7/32" Tread Width - 1/4-20 TH'D Rivet - B10-1016

Steel Flat Bearing w/ Rivet - 1" Dia. - 7/32" Tread Width - 1/4-20 TH'D Rivet

$3.49

Mfg : CHG

Model No. : B10-1016

eRestaurantParts No.: 40684

Units : Each

Flat bearing w/ Rivet. 1" in Diameter. 7/32" Rolling Tread Width. Supports 57lbs. (based on 600 r.p.m.). Steel Inner and Outer race. 1/4-20 Threaded Rivet. 1/8" Shaft Clearance. Lead Time: 2 Days Learn More

Steel Flat Bearing w/ Rivet - 1-5/16" Dia. - 5/16" Tread - 1/4-20 TH'D Rivet - B10-1034

Steel Flat Bearing w/ Rivet - 1-5/16" Dia. - 5/16" Tread - 1/4-20 TH'D Rivet

$6.99

Mfg : CHG

Model No. : B10-1034

eRestaurantParts No.: 40686

Units : Each

Flat bearing w/ Rivet. 1-5/16" in Diameter. 7/32" Rolling Tread Width. Supports 87lbs. (based on 600 r.p.m.). Steel Inner and Outer race. 1/4-20 Threaded Rivet. 3/16" Shaft Clearance. Lead Time: 2 Days Learn More

Nylon & Steel Flat Bearing w/ Rivet - 1" Dia - 7/32" Width - 1/4-20 Th'd Rivet - B10-1822

Nylon & Steel Flat Bearing w/ Rivet - 1" Dia - 7/32" Width - 1/4-20 Th'd Rivet

$6.63

Mfg : CHG

Model No. : B10-1822

eRestaurantParts No.: 40690

Units : Each

Flat bearing w/ Rivet. 1" in Diameter. 7/32" Rolling Tread Width. Supports 53lbs. (based on 600 r.p.m). Steel inner race. Nylon and Steel outer race. 1/4-20 Threaded Rivet. 1/8" Shaft Clearance. Lead Time: 2 Days Learn More

Steel Flat Bearing w/ 1/4" Hole - 7/8" Diameter - 7/32" Tread Width - B20-1013

Steel Flat Bearing w/ 1/4" Hole - 7/8" Diameter - 7/32" Tread Width

$3.20

Mfg : CHG

Model No. : B20-1013

eRestaurantParts No.: 40710

Units : Each

Steel flat bearing w/ 1/4" size hole for rivet or stud. 7/8" overall diameter. 7/32" tread width. Steel inner and outer race. 42lbs load rating (based on 600 r.p.m.). Lead Time: 2 Days Learn More

Steel Flat Bearing w/ 1/4" Hole - 1" Diameter - 5/16" Tread Width - B20-1019

Steel Flat Bearing w/ 1/4" Hole - 1" Diameter - 5/16" Tread Width

$3.97

Mfg : CHG

Model No. : B20-1019

eRestaurantParts No.: 40712

Units : Each

Steel flat bearing w/ 1/4" size hole for rivet or stud. 1" Overall Diameter. 5/16" Tread Width. Steel inner and outer race. 57lbs load rating (based on 600 r.p.m.). Lead Time: 2 Days Learn More

Steel Flat Bearing w/ 1/4" Hole - 1-5/16" Diameter - 5/16" Tread Width - B20-1028

Steel Flat Bearing w/ 1/4" Hole - 1-5/16" Diameter - 5/16" Tread Width

$4.68

Mfg : CHG

Model No. : B20-1028

eRestaurantParts No.: 40714

Units : Each

Steel flat bearing w/ 1/4" size hole for rivet or stud. 1-5/16" Overall Diameter. 5/16" Tread Width. Steel inner and outer race. 87lbs load rating (based on 600 r.p.m.). Lead Time: 2 Days Learn More

Steel Flat Bearing w/ 1/4" Hole - 1" Diameter - 7/32" Tread Width - B20-1032

Steel Flat Bearing w/ 1/4" Hole - 1" Diameter - 7/32" Tread Width

$4.80

Mfg : CHG

Model No. : B20-1032

eRestaurantParts No.: 40716

Units : Each

Steel flat bearing w/ 1/4" size hole for rivet or stud. 1" Overall Diameter. 7/32" Tread Width. Steel inner and outer race. 57lbs load rating (based on 600 r.p.m.). Lead Time: 2 Days Learn More

Stainless Steel Bearing w/ 1/4" Hole - 1-5/16" Diameter - 5/16" Tread Width - B20-1219

Stainless Steel Bearing w/ 1/4" Hole - 1-5/16" Diameter - 5/16" Tread Width

$5.89

Mfg : CHG

Model No. : B20-1219

eRestaurantParts No.: 40718

Units : Each

Stainless Steel flat bearing w/ 1/4" size hole for rivet or stud. 1-5/16" Overall Diameter. 5/16" Tread Width. Stainless Steel inner and outer race. 87lbs load rating (based on 600 r.p.m.). Lead Time: 2 Days Learn More

Stainless Steel Bearing w/ 1/4" Hole - 29/32" Diameter - 1/4" Tread Width - B20-1230

Stainless Steel Bearing w/ 1/4" Hole - 29/32" Diameter - 1/4" Tread Width

$8.13

Mfg : CHG

Model No. : B20-1230

eRestaurantParts No.: 40720

Units : Each

Stainless Steel flat bearing w/ 1/4" size hole for rivet or stud. 29/32" Overall Diameter. 1/4" Tread Width. Stainless Steel inner and outer race. 90lbs load rating (based on 600 r.p.m.). Lead Time: 2 Days Learn More

Nylon & Steel Flat Bearing w/ 1/4" Hole - 1" Diameter - 7/32" Tread Width B20-1819

Nylon & Steel Flat Bearing w/ 1/4" Hole - 1" Diameter - 7/32" Tread Width

$3.78

Mfg : CHG

Model No. : B20-1819

eRestaurantParts No.: 40722

Units : Each

Steel flat bearing w/ 1/4" size hole for rivet or stud. 1" overall diameter. 7/32" tread width. Nylon & Steel outer race. Steel Inner race. 53lbs load rating (based on 600 r.p.m.) Learn More

Rubber Tire Bearing w/ 1/4" Hole - 1-5/16" Diameter - 5/16" Tread Width - B23-1013

Rubber Tire Bearing w/ 1/4" Hole - 1-5/16" Diameter - 5/16" Tread Width

$6.02

Mfg : CHG

Model No. : B23-1013

eRestaurantParts No.: 40730

Units : Each

Rubber tire bearing w/ 1/4" hole for rivet or stud. 1-5/16" Overall Diameter (not including rubber tread). 5/16" Tread Width. Steel Inner and Outer Race. 87lbs load rating (based on 600 r.p.m.). Lead Time: 2 Days. Learn More

Concave Bearing w/ 1/4" Hole - 1-3/16" Diameter - 5/16" Concave Tread Width B24-1013

Concave Bearing w/ 1/4" Hole - 1-3/16" Diameter - 5/16" Concave Tread Width

$5.80

Mfg : CHG

Model No. : B24-1013

eRestaurantParts No.: 40732

Units : Each

Concave Bearing w/ 1/4" hole for rivet or stud. 1-3/16" Diameter. 5/16" Concave Tread Width. Steel inner and outer race. 80lb load rating (based on 600 r.p.m.). Lead Time: 2 Days Learn More

Nylon Wheel Pulley w/ Steel Races - 2" Dia 1/4" Hole - .315 Concave Tread Width

Nylon Wheel Pulley w/ Steel Races - 2" Dia 1/4" Hole - .315 Concave Tread Width

$12.64

Mfg : CHG

Model No. : B25-1810

eRestaurantParts No.: 40736

Units : Each

Nylon Wheel Pulley w/ Steel Inner and Outer Races. 2" In overall diameter. 1/4" diameter hole. .315" total concave tread width. Lead Time: 2 Days Learn More

24" (610mm) LED Lamp ONLY - 8W - 120-277V

24" (610mm) LED Lamp ONLY - 8W - 120-277V

$307.68

Mfg : Keil®

Model No. : LED-200013

eRestaurantParts No.: 47396

Units : Each

  • 24" (610mm) Replacement LED Lamp ONLY
  • 8W DWC (5500 K Color Temperature)
  • Fits into Model# LED24X418W
  • Operating temperature range from -40°F to 104°F (-40°C to 40°C)
  • Instant ON - no ballast or starter to warm up in cold environments, eliminates flickering and buzzing associated with fluorescent fixtures
Learn More

24" (610mm) LED Light - 8W Lamp - 120V-277V

24" (610mm) LED Cooler/Freezer Light Fixture - (1) 8W Lamp - 120V-277V

$408.00

Mfg : Keil®

Model No. : LED24X418W

eRestaurantParts No.: 47398

Units : Each

  • Environmentally friendly LED lamp. Draws less wattage, saving you 50-80% over standard fluorescent and incandescent fixtures with similar light output, also reduces landfill waste and contains NO harmful mercury
  • 1ea. 8 Watt, 5500 color temperature
  • Total Output: 800 Lumens
  • Voltage: 120-277VAC, 50-60Hz
  • Low profile design is ideal for walk-in coolers & freezers
  • Resilient, one-piece silicone gasket rated IP-65 for damp & wet locations
  • Corrosion-free, high impact polycarbonate housing
  • Provided with Stainless Steel mounting hardware and European type PG-16 conduit connecter
  • Bulb life rated at 50,000+ hours
  • 5 year manufacturer limited warranty on housing
  • 2 year manufacturer limited warranty on LED lamp
  • Operating temperature range from -40°F to 104°F (-40°C to 40°C)
  • Supplied with NEC-approved luminaire disconnects
  • Clear, high impact polycarbonate lens with ribs for maximum light dispersion
  • Superior highly-polished aluminum reflector improves light output
  • Instant ON - no ballast or starter to warm up in cold environments, eliminates flickering and buzzing associated with fluorescent fixtures
  • Eligible for LEED Credit on Green building projects
Learn More

48" (1219mm) LED Cooler/Freezer Light Fixture - (2) 15W Lamp - 120V-277V

48" (1219mm) LED Cooler/Freezer Light Fixture - (2) 15W Lamp - 120V-277V

$551.34

Mfg : Keil®

Model No. : LED48X6215W

eRestaurantParts No.: 47400

Units : Each

  • Environmentally friendly LED lamp. Draws less wattage, saving you 50-80% over standard fluorescent and incandescent fixtures with similar light output, also reduces landfill waste and contains NO harmful mercury
  • Low profile design is ideal for walk-in coolers & freezers
  • Voltage: 120-277VAC, 50-60Hz
  • Total Output: 3000 Lumens
  • Resilient, one-piece silicone gasket rated IP-65 for damp & wet locations
  • Corrosion-free, high impact polycarbonate housing
  • Provided with Stainless Steel mounting hardware and European type PG-16 conduit connecter
  • Bulb life rated at 50,000+ hours
  • 5 year manufacturer limited warranty on housing
  • 2 year manufacturer limited warranty on LED lamp
  • Operating temperature range from -40°F to 104°F (-40°C to 40°C)
  • Supplied with NEC-approved luminaire disconnects
  • Clear, high impact polycarbonate lens with ribs for maximum light dispersion
  • Superior highly-polished aluminum reflector improves light output
  • Instant ON - no ballast or starter to warm up in cold environments, eliminates flickering and buzzing associated with fluorescent fixtures
  • Eligible for LEED Credit on Green building projects/li>
Learn More

Flat Breaker Strip - Matte Gray

Flat Breaker Strip - Matte Gray

Starting at: $14.66

Mfg : Keil®

Model No. : T54-xxxx

eRestaurantParts No.: 48622-48636

Units : Each

  • Flat Breaker Strip
  • Available in widths from 15/16" (24mm) to 3" (76mm)
  • Paper masked one side
  • Mar Free
  • Will not absorb odors
  • USDA and FDA Approved
  • Furnished in 6 foot (1830mm) lengths with a standard thickness of .110 (2.8mm)
  • Special size widths available on quantity orders.
Learn More

Extruded Snap-On Breaker Strip

Extruded Snap-On Two-Piece Breaker Strip

Starting at: $24.55

Mfg : Keil®

Model No. : T55-20-xxx-xx

eRestaurantParts No.: 48642-48646

Units : Each

  • Extruded Snap-On Breaker Strip
  • Matte Gray PVC - Mar Free
  • Easily Cut
  • Odorless
  • USDA and FDA Approved
Two-Piece Snap-On Breaker Strip. Bottom strip has 5/32" (4mm) DIA. Countersunk holes every 6" (152mm). Allows for fastening with countersunk screws or standard pop-rivets. Top strip snaps in place concealing all fasteners. Learn More

Stainless Steel Hydraulic Door Closer with Flush Offset - W94-1010

Stainless Steel Hydraulic Door Closer with Flush Offset

$125.00

Mfg : Keil®

Model No. : W94-1010

eRestaurantParts No.: 48978

Units : Each

Stainless Steel Hydraulic Door Closer with Flush Offset. Solid stainless steel housing mechanism. Powerful gas-loaded hydraulic cylinder provides positive, smooth door closure. Unique cover design provides for easy installation and concealed mounting. Cushioned rubber roller and unique spring design offers smooth, quiet, trouble-free operation. Popular Flush and 1-1/8” oversize hooks. Interchangeability - unique concealed mounting hole pattern allows Snugger™ to easily replace all existing models in the field. NSF Listed. Learn More

Stainless Steel Hydraulic Door Closer with 1-1/8" Offset - W94-1020

Stainless Steel Hydraulic Door Closer with 1-1/8" Offset

$119.00

Mfg : Keil®

Model No. : W94-1020

eRestaurantParts No.: 48980

Units : Each

Stainless Steel Hydraulic Door Closer with 1-1/8" Offset. Solid stainless steel housing mechanism. Powerful gas-loaded hydraulic cylinder provides positive, smooth door closure. Unique cover design provides for easy installation and concealed mounting. Cushioned rubber roller and unique spring design offers smooth, quiet, trouble-free operation. Popular Flush and 1-1/8” oversize hooks. Interchangeability - unique concealed mounting hole pattern allows Snugger™ to easily replace all existing models in the field. NSF Listed. Learn More

Stainless Steel Spring Action Door Closer with Flush Offset - W95-1010

Stainless Steel Spring Action Door Closer with Flush Offset

$79.35

Mfg : Keil®

Model No. : W95-1010

eRestaurantParts No.: 48982

Units : Each

Stainless Steel Spring Action Door Closer with Flush Offset. Solid stainless steel construction throughout. Concealed Mounting offers clean, tamperproof appearance. Unique cover design provides easy installation. Interchangeability - unique concealed mounting hole pattern allows Close-Master™ to easily replace all existing models in the field. Cushioned rubber roller and unique spring design offers smooth, quiet, trouble-free operation. Close-Master™ permits fast door closure and positive gasket seal, reducing energy costs. NSF Listed. Learn More

Stainless Steel Spring Action Door Closer | Offset: 1-1/8"  - W95-1020

Stainless Steel Spring Action Door Closer | Offset: 1-1/8"

$87.00

Mfg : Keil®

Model No. : W95-1020

eRestaurantParts No.: 48984

Units : Each

Stainless Steel Spring Action Door Closer with 1-1/8" Offset. Solid stainless steel construction throughout. Concealed Mounting offers clean, tamperproof appearance. Unique cover design provides easy installation. Interchangeability - unique concealed mounting hole pattern allows Close-Master™ to easily replace all existing models in the field. Cushioned rubber roller and unique spring design offers smooth, quiet, trouble-free operation. Close-Master™ permits fast door closure and positive gasket seal, reducing energy costs. NSF Listed. Learn More

Stainless Steel Heavy Duty Latch & Strike | Offset 3/4" to 1-5/8" W99-3815-SS

Stainless Steel Heavy Duty Latch & Strike | Offset 3/4" to 1-5/8"

$470.98

Mfg : Keil®

Model No. : W99-3815-SS

eRestaurantParts No.: 49004

Units : Each

Stainless Steel Heavy Duty Latch & Strike | Offset 3/4" to 1-5/8". The only all stainless steel latch in today's market. Ideal for highly corrosive and humid environments. Ideal for marine applications, outside cold rooms and commercial refrigerated truck bodies. Tamper-proof design. Padlock feature for maximum security. Cylinder lock models available. Finish: Satin Chrome. No Lock. NSF Listed. Learn More

Flat Breaker Strip - 8' Lengths - Black

1-1/2" & 2" Wide Flat Breaker Strip - 8ft. Lengths - Black

Starting at: $10.05

Mfg : Industrial

Model No. : BKR-x-xx

eRestaurantParts No.: 49020-49022

Units : Each

  • Black - Flat Breaker Strip
  • 8 ft. Long Strips
  • Available in 2 in. and 1-1/2 in. Wide Strips
  • Used in Reach-In and Walk-In Refrigeration
Learn More

Items 1 to 25 of 26 total

Set Descending Direction
per page

Grid  List 

Page:
  1. 1
  2. 2